{"id":159,"date":"2012-04-21T08:52:51","date_gmt":"2012-04-21T07:52:51","guid":{"rendered":"https:\/\/www.jedicut.com\/en\/?p=159"},"modified":"2017-04-01T08:54:26","modified_gmt":"2017-04-01T07:54:26","slug":"jedicut-2-3-2-improvements-and-corrections","status":"publish","type":"post","link":"https:\/\/www.jedicut.com\/en\/blog\/jedicut-cnc-software\/jedicut-2-3-2-improvements-and-corrections\/","title":{"rendered":"Jedicut 2.3.2 : improvements and corrections"},"content":{"rendered":"<h2>Confirmation window for CNC cutting<\/h2>\n<p>This window shows the heating control mode you select manually on your CNC board. I changed the display to make it more efficient.<\/p>\n<p>Now you can read:<\/p>\n<ul>\n<li>&#8220;PC&#8221; when it is the PC handle the heating value.<\/li>\n<li>&#8220;External&#8221; when you choose to set heating value manually from the CNC board.<\/li>\n<li>&#8220;N\/A&#8221;, used for CNC board without signal to indicate this information.<\/li>\n<\/ul>\n<h2>Heating control wizard<\/h2>\n<p>The G4M adapter doesn&#8217;t have signal to indicate the heating value when the heating control is set to &#8220;manually&#8221; on your board. It&#8217;s not embarrassing for CFMG, it was for Jedicut.<\/p>\n<p>I improve the heating control wizard.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-full wp-image-161\" src=\"https:\/\/www.jedicut.com\/en\/wp-content\/uploads\/sites\/2\/2017\/04\/Jedicut-Evol-assistant-config-chauffe.png\" alt=\"\" width=\"520\" height=\"108\" srcset=\"https:\/\/www.jedicut.com\/en\/wp-content\/uploads\/sites\/2\/2017\/04\/Jedicut-Evol-assistant-config-chauffe.png 520w, https:\/\/www.jedicut.com\/en\/wp-content\/uploads\/sites\/2\/2017\/04\/Jedicut-Evol-assistant-config-chauffe-300x62.png 300w\" sizes=\"(max-width: 520px) 100vw, 520px\" \/><\/p>\n<p>You can set up wire heating values like that\u00a0:<\/p>\n<ol>\n<li>You click on &#8220;Measure 1&#8221;,<\/li>\n<li>You click in the check box that is next to the percentage of heating value (see illustration),<\/li>\n<li>You specify a heating value that you want to send to the CNC board,<\/li>\n<li>You select a slow speed,<\/li>\n<li>You click on &#8220;Test&#8221;.<\/li>\n<\/ol>\n<p>If heating value is &#8220;ok&#8221; for you, click on &#8220;Save&#8221; button. If not, change the heating value and click on &#8220;Test&#8221; button to try again.<\/p>\n<p>When the first measure is ok, click on &#8220;measure 2&#8221; and repeat the test with a high speed value (as fast as possible).<\/p>\n<h2>Bug fixed<\/h2>\n<p>Since the previous version of Jedicut, there is a bug in the display of cutting project when you prepare more than one cutting project at a time (when you had multiple tabs). It&#8217;s fixed.<\/p>\n<p>The arrow settings disappeared when you open the window of cutting cycle manager\u00a0: fixed.<\/p>\n<h2>A little extra<\/h2>\n<p>I don&#8217;t know about you, but I&#8217;m used to exit of windows software configuration by pressing the &#8220;Esc&#8221; key. The effect is the same as clicking on the cross, or clicking on &#8220;Cancel&#8221;. It&#8217;s just faster!<\/p>\n<p>I never put it up on Jedicut. It is now done, and the navigation in Jedicut is really faster.<\/p>\n<p>As usual, if you find new bugs, if you have new ideas, come and share it on the <a title=\"CNC cutting forum\" href=\"https:\/\/www.jedicut.com\/forums\/\">forum of the CNC cutting<\/a>.<\/p>\n<span class=\"et_bloom_bottom_trigger\"><\/span>","protected":false},"excerpt":{"rendered":"<p>Confirmation window for CNC cutting This window shows the heating control mode you select manually on your CNC board. I changed the display to make it more efficient. Now you can read: &#8220;PC&#8221; when it is the PC handle the heating value. &#8220;External&#8221; when you choose to set heating value manually from the CNC board. [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[1],"tags":[],"class_list":["post-159","post","type-post","status-publish","format-standard","hentry","category-jedicut-cnc-software"],"_links":{"self":[{"href":"https:\/\/www.jedicut.com\/en\/wp-json\/wp\/v2\/posts\/159","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.jedicut.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.jedicut.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.jedicut.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.jedicut.com\/en\/wp-json\/wp\/v2\/comments?post=159"}],"version-history":[{"count":2,"href":"https:\/\/www.jedicut.com\/en\/wp-json\/wp\/v2\/posts\/159\/revisions"}],"predecessor-version":[{"id":162,"href":"https:\/\/www.jedicut.com\/en\/wp-json\/wp\/v2\/posts\/159\/revisions\/162"}],"wp:attachment":[{"href":"https:\/\/www.jedicut.com\/en\/wp-json\/wp\/v2\/media?parent=159"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.jedicut.com\/en\/wp-json\/wp\/v2\/categories?post=159"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.jedicut.com\/en\/wp-json\/wp\/v2\/tags?post=159"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}