Banner

10 résultats trouvés

Re: foam cuter

sorry got it to work and heating up wire and got smook have burnt out mega 2560 and ramps 1.4 2 2588 driver boards and now thinking about using the mega 2560 and the ramps 1.6 with 270W so have a lot of reading to do thank for help

Re: foam cuter

well i have loaded the fremerware 3.0.0 up to my ramps 1.4 and renamed it to 3.0.A. setup jadicut as pdf images and not a thing on the motors. when it is switch on it goes through the setup and i get x1/y1/x2/y2 all showing x1/1 y1/1 x2/1 y2/1 if the endstops are at the home position if i set x1 so ...

Re: foam cuter

d’abord je suis anglais et mon français n’est pas bon désolé je vis à 03120 j’utilise un routeur cnc imprimante 3D vide ancien coupe-mousse J'utilise solidworks autocad rhino la plupart du logiciel devcad. je suis heureux d'aider avec n'importe quel design cad Mon coupeur de mousse est imprimé en 3D...

Re: help is there a English ver of this Jedicut_Alden_ard_ramps_6.pdf

hi sorry for the hassle with the end stops i have optical and Mechanical but both have 3 wires V / S / G this all i can find on them so with the optical end stops can we just hard wire start from the end stop to the ramps board and add homing to the sketch https://i0.wp.com/betrue3d.dk/wp-content/up...

Re: help is there a English ver of this Jedicut_Alden_ard_ramps_6.pdf

thank you for your reply . What i am trying to do is use optical end stops that has 3 wires V / S / G. And not mechanical end stops that only have 2 wires S / G. I think all i have to do is add a 5V suply to the optical end stop and connet as instruction Merci pour votre réponse . Ce que je cherche ...

help is there a English ver of this Jedicut_Alden_ard_ramps_6.pdf

hi i am looking for a English ver of this Jedicut_Alden_ard_ramps_6.pdf i ma building the LUXE version and not to sour on the end stops i wont to use Optical End stop i think i just have to run a 5V to it and use the ground and the single on instructions it may be clear to me in English thanks for a...

foam cuter

hi at the moment i am working on a 3D printed Foam cuter my design criteria 1 keep the price as low as possible 2 it must cut wings panels of 1300 mm and fuz section off 50 mm to 100 mm x 450 mm x 450 mm 3 run from a USB Arduino ramps 1.4 with open source software 4 all the farm parts to be 3D print...

Aller à la recherche avancée

`); }); })(jQuery, window, document, phpbb);