Banner

7 résultats trouvés

Re: G-Code exportes values about 100 smaller than wanted size

Thanks again.
BTW
it's very easy to change letters!
just open the Gcode in notpad++ and do "find and replace" function. (cntrl+f) and then tell it to find all Z and change them to V.
or find whatever word or letter you want and change it to a word or a letter you want.
:)

Re: G-Code exportes values about 100 smaller than wanted size

I don't have sucsess in uploading the file so I will just put the gcode text here: ( Plan XY ) G17 ( SET LENGTH UNITS ) G21 ( SET DISTANCE MODE ) G91 ( SET CUTTER COMPENSATION ) G40 ( SET TOOL LENGTH OFFSET ) G49 ( SET PATH CONTROL MODE ) G64 ( SET FEED RATE MODE ) G94 M3 ( Pause [millisec] ) G4 P20...

G-Code exportes values about 100 smaller than wanted size

Hi, I want to generate a trapezoid wing so I open two profiles using a DXF file. I set the root to 200mm and the tip to 150mm. after generating the GCode I open it in Notepad to see the values and instead of having a 200mm root I get about 1.6mm root and the same issue for the tip chord. the other m...

Aller à la recherche avancée

`); }); })(jQuery, window, document, phpbb);