Program issues
Posté : sam. janv. 05, 2019 2:50 pm
Hello,
I have some problems with Jedicut. Maybe you can help me.
problem 1 Here you can see the airfoil with aileron and spar. I started the machine and i was wondering because the spar was under the wing?? So i checked the cut simulator and I saw this: problem 2
Same wing, same program as problem 1. When I activate the simulation view for the axis x1 and y2 you can see this: problem 3
I have a dxf file of an airfoil with aileron and try to add a planking: Without the aileron I don´t have any problems.
The machine tries to cut these lines, so the planking feature is unusable with aileron.
I have windows 10
Intel I7
4K monitor (some problems with other programs)
I create my airfoils with Autodesk Inventor.
Thank you
Best regards
Robin
I have some problems with Jedicut. Maybe you can help me.
problem 1 Here you can see the airfoil with aileron and spar. I started the machine and i was wondering because the spar was under the wing?? So i checked the cut simulator and I saw this: problem 2
Same wing, same program as problem 1. When I activate the simulation view for the axis x1 and y2 you can see this: problem 3
I have a dxf file of an airfoil with aileron and try to add a planking: Without the aileron I don´t have any problems.
The machine tries to cut these lines, so the planking feature is unusable with aileron.
I have windows 10
Intel I7
4K monitor (some problems with other programs)
I create my airfoils with Autodesk Inventor.
Thank you
Best regards
Robin