Page 1 sur 1

how to generate a gcode with cut compensation?

Posté : lun. juil. 26, 2021 5:50 pm
par madfly75
hi i'm trying to use jedicut to make the gcode for my cnc machine, i set all the parameters but i can't generate a gcode with the cut compensation, i wanted to know where i am wrong and if there is a guide, a greeting

Maybe some information was missing on this post, I wanted to integrate them with photos and sample files. If the compensation works using different materials I should get completely different GCODE and instead I get the same, how can you generate a file with the cutting radius compensation?
file di prova.zip
setting and test file
(23.3 Kio) Téléchargé 26 fois

Re: how to generate a gcode with cut compensation?

Posté : sam. juil. 31, 2021 10:46 am
par AERODEN
Hello,
There is a video that explains how to use GCode with Jedicut,
here is the link:

https://www.jedicut.com/blog/actualite- ... c-jedicut/


A+
Alain

Re: how to generate a gcode with cut compensation?

Posté : mar. août 03, 2021 10:53 am
par Jerome
Hello maclfly75 !

Do you succeed ?