Jedicut and Xylotex
Posté : jeu. janv. 04, 2007 3:19 pm
par Rick Diaz
Will the 4-Axis Xylotex board work with Jedicut using the MM2001 quartz-based timer board wired to the pin10 of the DB25?
MM2001 quartz-based timer board info:
http://gm.cnc.free.fr/CNC/timer_quartz.zip
Regards...Rick Diaz
Re: Jedicut and Xylotex
Posté : ven. janv. 05, 2007 1:15 pm
par Jerome
Hi !
If you board parallel port is plugged like a MM2001 parallel port, yes your board will work. If not, contact me and we will work in order to do it possible.
Re: Jedicut and Xylotex
Posté : sam. janv. 06, 2007 5:02 am
par Joe
Hi everyone,
I try to download the program,but it doesn't run a setup on my computer! Can anybody help?
Re: Jedicut and Xylotex
Posté : sam. janv. 06, 2007 10:49 am
par Jerome
Hi,
Jedicut don't need setup. Download the archive file, and extract files in a folder named Jedicut, and execute Jedicut.exe .
That's all folks
