Page 1 sur 1

Problems with Jedicut :(

Posté : sam. mars 03, 2007 7:03 pm
par Theodor Dahl
Hallo

I have bought an CNC Foamcutter.
With this Controler
http://shop.strato.de/epages/Store4.sf/ ... s/SM44PCV5

It is running with PCNC but not with jedicut :(

Wath is wrong ?

Sorry for my bad english, I´m from germany

PS.: that is my Formcutter http://theodord.th.funpic.de/CNCfoamcutter

Re: Problems with Jedicut :(

Posté : sam. mars 03, 2007 7:08 pm
par Theodor
bild, not bought

Re: Problems with Jedicut :(

Posté : dim. mars 04, 2007 4:18 pm
par eptam
You must be pin configrations.

Re: Problems with Jedicut :(

Posté : dim. mars 04, 2007 4:28 pm
par Theodor
I have di that, but it isent running

Re: Problems with Jedicut :(

Posté : lun. mars 05, 2007 1:41 pm
par Jerome
Hi !

Take a look at your Jedicut pin's configuration, timer/motor synchronization check box, and speed value. You also have to try dll (use XP dll for the beginning).

No Problems with Jedicut :)

Posté : lun. mars 05, 2007 5:32 pm
par Theodor Dahl
Much thanks (tu)

with the xp.dll it is running >:D<

I'm so lucky :)



Theodor Dahl