Get JediCut to Work
Posté : mar. juil. 22, 2008 9:50 am
Hi Jerome!!!
I have some questions to get JediCut to work and i hope you could help me.
I have a Foam PRO Driver Board Kit from Hobby CNC and i want to use a Windows 2000 Laptop with the new JediCut Version.
1) Witch dll i must use to get Jedicut to work? i tried the CNC Net98.dll but no Motor is moving. ( Must i use a other Cut speed than 2000000?)
Is the 98 dll rigth for Windows 2000?
2) In GMFC i get a Timer Value Back from the CNC Borad so that i noticed that the kommunikation between PC and CNC Board should work.
Could i see something else in JediCut as well? How could i see that there is a kommunikation between the PC and the board?
3) How must i set up the Frequency Timer, what value should i use, or is the 4000 OK.
4) Is it possible that the Clock/ Direction Parameters must be changed "Engine X1 8 9" to "Engine X1 9 8" etc.
5) The Heating Parameters could not be changed in the Options Dialog. Could this be a Bug?
By the way the design from JediCut looks very cool.
Regards from Dortmund
Dirk
I have some questions to get JediCut to work and i hope you could help me.
I have a Foam PRO Driver Board Kit from Hobby CNC and i want to use a Windows 2000 Laptop with the new JediCut Version.
1) Witch dll i must use to get Jedicut to work? i tried the CNC Net98.dll but no Motor is moving. ( Must i use a other Cut speed than 2000000?)
Is the 98 dll rigth for Windows 2000?
2) In GMFC i get a Timer Value Back from the CNC Borad so that i noticed that the kommunikation between PC and CNC Board should work.
Could i see something else in JediCut as well? How could i see that there is a kommunikation between the PC and the board?
3) How must i set up the Frequency Timer, what value should i use, or is the 4000 OK.
4) Is it possible that the Clock/ Direction Parameters must be changed "Engine X1 8 9" to "Engine X1 9 8" etc.
5) The Heating Parameters could not be changed in the Options Dialog. Could this be a Bug?
By the way the design from JediCut looks very cool.
Regards from Dortmund
Dirk