problem with the cutting of a wing

#1
Hi,

I have a problem with the cutting of a wing
the wing has these dimensions:
Wing_2.JPG
Wing_2.JPG (58.21 Kio) Vu 143 fois
Wing_2.JPG
Wing_2.JPG (58.21 Kio) Vu 143 fois
If I cut now burn me at the core at the end Sun.
I have many options with the velocity +
Temperature tried,unfortunately without success

Can this geometry to be cut, or do I cut the
wings into 2 parts?

Manfred
Fichiers joints
Wing_1.JPG
Wing_1.JPG (100.77 Kio) Vu 143 fois

Problem is fixed

#2
Hello,

I had configured in Jedicut bars.
Was required to reach the rail, drove X1 + X2 synchronously,
then X2 was first slowly, but so slowly
that the nuclear burning at the end.
In this geometry, it is probably better no bars on
tochooseaverage .
I have now cut without struts 2 good cores.

Manfred
cron