Page 1 sur 1

problem with the cutting of a wing

Posté : mar. févr. 14, 2012 1:26 pm
par MAES
Hi,

I have a problem with the cutting of a wing
the wing has these dimensions:
Wing_2.JPG Wing_2.JPG Vu 2348 fois 58.21 Kio
Wing_2.JPG Wing_2.JPG Vu 2348 fois 58.21 Kio
If I cut now burn me at the core at the end Sun.
I have many options with the velocity +
Temperature tried,unfortunately without success

Can this geometry to be cut, or do I cut the
wings into 2 parts?

Manfred

Problem is fixed

Posté : ven. févr. 17, 2012 2:48 am
par MAES
Hello,

I had configured in Jedicut bars.
Was required to reach the rail, drove X1 + X2 synchronously,
then X2 was first slowly, but so slowly
that the nuclear burning at the end.
In this geometry, it is probably better no bars on
tochooseaverage .
I have now cut without struts 2 good cores.

Manfred

Re: problem with the cutting of a wing

Posté : ven. févr. 17, 2012 7:55 am
par Jerome
Hello,
I'm sorry I didn't see your message before...

Re: problem with the cutting of a wing

Posté : ven. févr. 17, 2012 4:04 pm
par MAES
[quote=Jerome]
Hello,
I'm sorry I didn't see your message before...[/quote]

Hello Jerome,

no Problem, now i understand Jedicut every time better, good Software!!! :)-D