Hallo
I have bought an CNC Foamcutter.
With this Controler
http://shop.strato.de/epages/Store4.sf/ ... s/SM44PCV5
It is running with PCNC but not with jedicut
Wath is wrong ?
Sorry for my bad english, I´m from germany
PS.: that is my Formcutter http://theodord.th.funpic.de/CNCfoamcutter
Re: Problems with Jedicut :(
5Hi !
Take a look at your Jedicut pin's configuration, timer/motor synchronization check box, and speed value. You also have to try dll (use XP dll for the beginning).
Take a look at your Jedicut pin's configuration, timer/motor synchronization check box, and speed value. You also have to try dll (use XP dll for the beginning).
Jerome
No Problems with Jedicut :)
6Much thanks (tu)
with the xp.dll it is running >:D<
I'm so lucky
Theodor Dahl
with the xp.dll it is running >:D<
I'm so lucky
Theodor Dahl