Hallo Jerome,
Congratulation for your Software!!
I have built a CNC-Foamcutter with MM2001- Board + Xavtronic-USB.
It works great, but only with Heating "manuell".
I have config the MM2001 and Jedicut at 4kHz.
When i set the heating to PC, the Steppers goes verry slow, after a Time Jedicut hang's.
Is this a Timingproblem with the USB?
!'am German, sorry for my bad english
Re: Xavtronic-USB + Heating
2Hello,
I'm sorry I don't know how to solve this problem... I need to do test myself.
Maybe Xavier will have an idea ?
Ps : Can you edit your location in your profile on this forum ? You will appear on the foam cutters map
I'm sorry I don't know how to solve this problem... I need to do test myself.
Maybe Xavier will have an idea ?
Ps : Can you edit your location in your profile on this forum ? You will appear on the foam cutters map
Jerome
Re: Xavtronic-USB + Heating
3[quote=Jerome]
Hello,
I'm sorry I don't know how to solve this problem... I need to do test myself.
Maybe Xavier will have an idea ?
Ps : Can you edit your location in your profile on this forum ? You will appear on the foam cutters map [/quote]
Hello,
I'm sorry I don't know how to solve this problem... I need to do test myself.
Maybe Xavier will have an idea ?
Ps : Can you edit your location in your profile on this forum ? You will appear on the foam cutters map [/quote]
Re: Xavtronic-USB + Heating
4[quote=MAES]
[quote=Jerome]
Ps : Can you edit your location in your profile on this forum ? You will appear on the foam cutters map [/quote][/quote]
I have done!
By the Answer bevor, i had Problems with France :S
[quote=Jerome]
Ps : Can you edit your location in your profile on this forum ? You will appear on the foam cutters map [/quote][/quote]
I have done!
By the Answer bevor, i had Problems with France :S
Re: Xavtronic-USB + Heating
5Thanks !
First German subscription done You can see the result on this page.
I'll translate it as soon as possible : http://www.aeropassion.net/forums/addon ... on=usermap
First German subscription done You can see the result on this page.
I'll translate it as soon as possible : http://www.aeropassion.net/forums/addon ... on=usermap
Jerome
Re: Xavtronic-USB + Heating
6Hallo,
Du kannst deine Karte MM2001 um 4kHz konfiguriert (mit die Tasten). Vielicht das ist besser mit 10kHz, hast du schon probiert?
Hast du die richtige Firmware nehmen? Die Version ist mit Timer ( http://www.xavtronic.ch/files/firmware_MM.zip )
Gibt es ein "Antivirus" oder kannst du probiert mit ein andere Rechner? Was ist deine Rechner konfiguration?
Ich denke für eine Lösung aber wiss nicht jetzt... Sorry
Mit Freundliche Grüsse
Xavier
PS: Ich probiert auf Deutsch, aber ich denke das ist nicht so gut
Du kannst deine Karte MM2001 um 4kHz konfiguriert (mit die Tasten). Vielicht das ist besser mit 10kHz, hast du schon probiert?
Hast du die richtige Firmware nehmen? Die Version ist mit Timer ( http://www.xavtronic.ch/files/firmware_MM.zip )
Gibt es ein "Antivirus" oder kannst du probiert mit ein andere Rechner? Was ist deine Rechner konfiguration?
Ich denke für eine Lösung aber wiss nicht jetzt... Sorry
Mit Freundliche Grüsse
Xavier
PS: Ich probiert auf Deutsch, aber ich denke das ist nicht so gut
Re: Xavtronic-USB + Heating
7Hallo Xavier,
als Rechner habe ich ein 1,2GHz. Notebook mit Win-XP Sp3.
Virenprogramm ausgeschaltet, Jedicut-Priorität = hoch.
Im USB-Adapter befindet sich die richtige Firmware.
10kHz Timer-Einstellung am MM2001-Board bringt keine Änderung.
Das Notebook hat zum Glück noch einen LPT-Port, damit läuft
Jedicut mit der Heizungssteuerung einwandfrei.
Interresant ist auch, dass die Motoren mit dem USB-Adapter wesentlich
langsamer laufen.
Gruß, Manfred
als Rechner habe ich ein 1,2GHz. Notebook mit Win-XP Sp3.
Virenprogramm ausgeschaltet, Jedicut-Priorität = hoch.
Im USB-Adapter befindet sich die richtige Firmware.
10kHz Timer-Einstellung am MM2001-Board bringt keine Änderung.
Das Notebook hat zum Glück noch einen LPT-Port, damit läuft
Jedicut mit der Heizungssteuerung einwandfrei.
Interresant ist auch, dass die Motoren mit dem USB-Adapter wesentlich
langsamer laufen.
Gruß, Manfred
Re: Xavtronic-USB + Heating
8Hallo Manfred,
Probiert mal mit Jedicut-Priorität = normal. Ich habe nicht hoch Priorität machen.
MM2001 mit Timer 10KHz richtig für dem USB-Adapter ist.
Grüss,
Xavier
Probiert mal mit Jedicut-Priorität = normal. Ich habe nicht hoch Priorität machen.
MM2001 mit Timer 10KHz richtig für dem USB-Adapter ist.
Grüss,
Xavier
Re: Xavtronic-USB + Heating
9[quote=xavtronic]
Hallo Manfred,
Probiert mal mit Jedicut-Priorität = normal. Ich habe nicht hoch Priorität machen.
MM2001 mit Timer 10KHz richtig für dem USB-Adapter ist.
Grüss,
Xavier[/quote]
Hallo Xavier,
hab ich schon alles probiert, leider ohne Erfolg.
Gruß, Manfred
Hallo Manfred,
Probiert mal mit Jedicut-Priorität = normal. Ich habe nicht hoch Priorität machen.
MM2001 mit Timer 10KHz richtig für dem USB-Adapter ist.
Grüss,
Xavier[/quote]
Hallo Xavier,
hab ich schon alles probiert, leider ohne Erfolg.
Gruß, Manfred