Hi Jerome
I tried all dll to make my motors making work. I am using the controller from odin. Even with the Oszilloskop i could not see any signal comming out of the lpt port. Do i have to feed a signal to any pin first? If i try with K-Cam 4 then i manage to run my motors!
Do you have any advice?
Re: How make jedicut work
2Hi !
I don't know your odin board. I have some questions :
- What's your OS and what dll do you use ?
- Does your board contain a timer to synchronize orders sent to the board ? What frequency is it ?
Jerome
I don't know your odin board. I have some questions :
- What's your OS and what dll do you use ?
- Does your board contain a timer to synchronize orders sent to the board ? What frequency is it ?
Jerome
Jerome
Re: How make jedicut work
3Hi jerome
I use win 2000. That board has no timer or clock devise onboard. The board is documented on http://www.deutsche-werke.de/odin3d.htm. We already talked about that and you told me then, that you want to implement also other interfaces in your programm.
Thanks for your fast answer!
Greetings
Walo
I use win 2000. That board has no timer or clock devise onboard. The board is documented on http://www.deutsche-werke.de/odin3d.htm. We already talked about that and you told me then, that you want to implement also other interfaces in your programm.
Thanks for your fast answer!
Greetings
Walo
Re: How make jedicut work
4Hello Jerome
I managed it to make jedicut work! I had a bios problem....
Sorry to use your time for such things....
Regards
Walo
I managed it to make jedicut work! I had a bios problem....
Sorry to use your time for such things....
Regards
Walo