jedicut.com

Hi,
I'm new to Jedicut.
I'm trying to use a dat-file from airfoiltools and when I try to start the cut I get:

2003 une erreur est apparue lors du calcules points des profils

No matter what profile I use.

Probably a noob-problem.
Any help appreciated.

Hi and welcome cashalot

Can you post a dat-file which you use to test Jedicut, and a jdc file using this file ?

I will take a look at your problem.

Thanks Jerome!
It seems it doesn't matter which one I use, I always get that message as soon as I start the cutting wizzard or try to start the cut. I typed a few numbers in and saved the 'profile' with Jedicut to make sure it's not the file format but the same. Attached the files and a screen shot. I'm using the newest version plus the usbserial plugin.

The error is gone if I switch the jedicut.exe with the one from the 2.3.3 verson and leave everything else untouched.

Hello,

I took a look at your problem with Jedicut 2.3.4 build 0. I don't succeed in reproducing the problem.

Can you use the Jedicut.exe file which seems to have a problem, and click on the entry menu called "About" and confirm Jedicut version ?

How do you install Jedicut : you used installer or archive file ?

Last question, can you post your Jedicut*.ini files ? (control how many files of that type you have on your computer).

So, first answer: yes, it's 2.3.4 build 0
I uninstalled Jedicut, deleted all files, deleted everything in the registry related to Jedicut, and then installed Jedicut fresh using the installer.
After that it seems there are 3 Jedicut.ini files:
(attachment jedicutinifiles.JPG)

Jedicut.ini is also attached ( I had to rename it to be able post it here to .dat )
My computer runs Windows 10 64bit.

The error 2003 is still there; as soon as I hit "Cut Preview" or "Cut" + "Ok" in the next step.

Then I took my laptop, installed Jedicut there and it shows the same error.

Well, I tried an older laptop with windows 8. I used the zip file here. This one complains after starting jedicut : "Unable to extract IO.SYS. Log in as a user who has such permission". Ignoring all these messages (10 times) I can work in Jedicut. I type in a basic airfoil and a wing cut -> same erruer 2003.
I can't belive I'm the only one. This laptop is an old one that I've never used myself and has none of my other stuff on there, pretty basic Windows 8.
Could it be language, or time zone?

Hello

I have to reproduce this case. It's very interesting

What timezone do you use ?
What is your decimal separator in windows ?
What's your windows language ?

I will try to delete and reinstall Jedicut on my labtop (win10 64 bits).

For io.sys message, juste delete io.dll. This file don't work with windows 7, 8 and 10. I did a mistake when I built the setup file.

FOUND IT!!!

I tried two computers and can reproduce: Any communication plugin other than GCODE will produce this error. When I select GCODE, it works. But I use USBSERIAL and a fresh install has FILETRACE as default, that's why it crashes in both cases.

I'm sure you'll find the cause for this now!!

Thanks !!!! I wil look at this quickly !