jedicut.com

Dear Forum,

Can I do this? Or, do I have to add files manually?

Thanks!
Mike

Hello,

I don’t know this file format. We can program a new plugin maybe.

Can you post a zip file with a sample ?

Hi Jerome!

The following link has Dr Drela's coordinate files; both .dat and .cor

http://www.charlesriverrc.org/articles/ ... rfoils.htm

Thanks for your awesome program!

Sincerely,
Mike

Hello

Cor files seems to be easy to read. It should be easy to program a new plugin for Jedicut

Is there a file you want to use in priority ?

Thanks for your message

I use .COR files to cut in Jedicut, converting them to .DAT files in this simple way.
Force the opening of a .COR file in the Windows Notepad or free Notepad ++ (right click and open with). Then save as a .DAT file, selecting "all files" and I have a file ready to open in Jedicut without creating a new plugin

Hello,

Thanks for this tricks Inelsal !

I quickly publish a new plugin dedicated to cor files. You can download it here : viewtopic.php?f=19&t=10103

Keep me in touch

Hello,

Is there anybody for a little feedback about the usage of this plugin ?

Thanks !

Hello Jerome
After publishing the Open.cor plugin I didn't have time to test it. It wasn't a priority as I use a different way to deal with .cor fiels.
Now I unzipped the OpenCor v0.1.zip file to the Jedicut_v2.3.2.5 and Jedicut_v2.3.4.7 .dll catalogues
In both programmes new file type shows up (called Profile but without an extension) and it's not possible to select it
Not sure why it happens, maybe I do something wrong when adding Open.cor file to the .ddl library
So far I've been always using the .dll libraries integrated with Jedicut
Greetings
Józef

Thanks for you feedback ! I will take a look at this very soon