jedicut.com

Posté : **sam. mars 03, 2007 7:03 pm**

Hallo

I have bought an CNC Foamcutter.
With this Controler
http://shop.strato.de/epages/Store4.sf/ ... s/SM44PCV5

It is running with PCNC but not with jedicut

Wath is wrong ?

Sorry for my bad english, I´m from germany

PS.: that is my Formcutter http://theodord.th.funpic.de/CNCfoamcutter

Posté : **sam. mars 03, 2007 7:08 pm**

bild, not bought

Posté : **dim. mars 04, 2007 4:18 pm**

You must be pin configrations.

Posté : **dim. mars 04, 2007 4:28 pm**

I have di that, but it isent running

Posté : **lun. mars 05, 2007 1:41 pm**

Hi !

Take a look at your Jedicut pin's configuration, timer/motor synchronization check box, and speed value. You also have to try dll (use XP dll for the beginning).

Posté : **lun. mars 05, 2007 5:32 pm**

Much thanks (tu)

with the xp.dll it is running >:D<

I'm so lucky

Theodor Dahl

jedicut.com

Problems with Jedicut :(

Problems with Jedicut :(

Re: Problems with Jedicut :(

Re: Problems with Jedicut :(

Re: Problems with Jedicut :(

Re: Problems with Jedicut :(

No Problems with Jedicut :)