Jedicut English version Download
Posté : mer. sept. 14, 2005 7:24 am
par arthur sell
I do not speak French, nor can I read French. Could someone please send me the link to the download site for the english language version of Jedicut which I understand is now availabe. Thank you
Arthur Sell
Sylvania, Ohio
United States
Re: Jedicut English version Download
Posté : mer. sept. 14, 2005 9:13 am
par Jerome
Hi,
To download Jedicut on aeropassion, you can use this link :
"
http://www.aeropassion.net/download/red ... er=Jedicut 2.0.zip"
By default, Jedicut is in French. To obtain the english version, you have just few click to do. In the main menu click on, "Aide > Préférences". A new window will appear and you'll have to choose "English" and click "OK" button. Jedicut will be in english.
Best regards
Jerome
Speed Unit setup
Posté : mer. févr. 15, 2006 11:22 pm
par JB
Hi Jerome,
I got some question about distance and speed setup in your program.
Number mm / step : Indicate distance between 2 steps.
Nb mm/pas = 0.506666
means one step the Axis move 0.506666 mm?
Speed : Integer indicating time elapse between 2 step of engine.
Cut Speed 20000000 , what is the unit of this number?
microsecond? or nano?
regards
JB