jedicut.com

Hi
I need help with the engine setup.
I am using inch here in the USA
Motor is 200 Step
screw is 18 turn for Inch or 25.4mm
How do I put that in to the program.
Thanks for any help.
Robert

That would be 0.00705555555 (that is when u use full step)

25.4/18/200/1 (fullstep) = 0.007055555
25.4/18/200/2 (halfstep) = 0.003527777

and so on

Good lucky

Grtz,

Rob

thanks, for the help.
Robert