-
Hi, Jerome!
I have integrated Your USB-adapter into interface MM2001,( on the same
PCB, including PIC18...., USB-connector and all other parts.)
What now? I have to program the PIC.... Perhaps I can find all I need
on Your French pages, but I don't understand French.
Could You publish something like instructions for the programming the
PIC16F874 in interface MM2001. ( In English or German language)
You know what I am speaking about?
And one more very important question: Will Your adapter work with the
software GMFC-USB, or only with Yedicut?
I don't understand this with external timer. The MM2001 has an
internal timer. Please explain me this.
Sorry for bad spelling.
Regards and thanks Robert

MY page: http://free-os.t-com.hr/Robert_Mandic/

Hi !

I'm very impressed ! Congratulation for your work -D

I hope you understand that you have to program 2 pics ? The first is MM2001 pics and you can find the program to load on MM2001 website. The second is USB pics and the program is available here : http://xavtronic.freezee.org/index.php .

This USB adapter is only compatible with Jedicut because GMFC developer doesn't want to add it in his software. This adapter is free and use a free comunication protocol, what is not the case of GMFC-USB. I ask it, but the developer refuse to communicate it.

You have 2 choices : build Xavtronic free adapter and only use Jedicut, or buy a MMUSB and GMFC addon (75€). In this last case, you'll be able to use only GMFC.

When I spkeak about external timer, It's for Jedicut because Jedicut can use an external timer, or not (an internal timer for the board).

Hi, Jerome!
Thanks for Your answer. It is all clear now. However, the integration of the USB-adapter into interface MM2001 makes no sense, if the adapter works only with one software.
Thanks and regards Robert